Shop / Spreadsheets & Workbooks / Siding Estimate Workbook — Takeoff, Cost Calculator, Customer Quote & Job Profit Ledger (Excel)
How much siding do I need? Measure the house first
Measure a siding replacement job, price it from your own price book, and hand the customer a clean quote — a macro-free Excel workbook whose quote stays locked until 17 built-in self-checks pass. The answer is not a guess from the floor area — it is a takeoff. Measure the walls, subtract the openings, add the trim and the waste, and only then convert to squares. Here is the exact list the workbook's Takeoff tab works through, and a real sample house priced end to end.
The takeoff checklist
Every figure below is a field on the siding workbook's Takeoff tab. Miss one and the order is short — or the customer pays for material that never goes on the wall:
- Wall and gable measurements — every wall, plus the gable triangles above them
- Openings — windows and doors, subtracted so you do not buy siding for holes
- Corners, J-channel and starter strip — the trim that frames every run
- Soffit and fascia — the underside and edge of the roof overhang
- Gutters and downspouts — counted, not assumed
- Sheathing allowance — extra material for the surface underneath
A real sample house, measured and priced
This is the workbook's worked example — a house you can audit line by line before you trust it with a real job:
Sample house — 2-story, 40 ft x 28 ft, 2,422 sq ft net, vinyl at $450/square with 10% waste: 27 squares ordered, materials $15,275.76, total job cost $25,329.36, quote total $31,661.70 with 25% markup, deposit $9,498.51, balance $22,163.19. Sample rates are illustrative, not verified supplier quotations.
Sample data above is fictional, shown so you can judge the output before buying.
Two storeys, 40 ft by 28 ft, 2,422 sq ft net, vinyl at $450 per square with 10% waste: 27 squares ordered, materials $15,275.76, total job cost $25,329.36, quote total $31,661.70 with 25% markup — deposit $9,498.51, balance $22,163.19. The waste factor is yours to set per material in the Price Book — 10% is the sample, not a rule — and the workbook prices four materials (vinyl, fiber cement, engineered wood, wood), each with its own prices, waste factors and install labor rates. Every Price Book figure is a sample: replace material prices, waste factors and labor rates with your own supplier and crew rates before a real customer sees a number.
What the takeoff does not cover
It prices one rectangular four-wall section at a time — multi-section or non-rectangular houses need separate takeoffs, one section per run. And no sales tax, permit or jurisdiction-specific charges are added automatically; the Quote lists standard exclusions, so apply your local taxes and required charges before issuing a binding proposal. The workbook is Microsoft Excel desktop only (2019, 2021 or Microsoft 365): it uses current Excel functions, including the review-key check, that Google Sheets does not support reliably.
The tool for this job
Siding Estimate Workbook — Takeoff, Cost Calculator, Customer Quote & Job Profit Ledger (Excel) — Measure a siding replacement job, price it from your own price book, and hand the customer a clean quote — a macro-free Excel workbook whose quote stays locked until 17 built-in self-checks pass.
$34.99 Buy on Payhip See the full product page →
Instant download after checkout. Sold and delivered by Payhip. More tools like this live on the Spreadsheets & Workbooks shelf.
Questions
Does it work in Google Sheets?
No. This release is built and checked for Microsoft Excel 2019, 2021 or Microsoft 365 on desktop, and uses current Excel functions (including the review-key check) that Google Sheets does not support reliably. Google Sheets is not a supported platform for this workbook.
Why does the Quote show dashes instead of the price?
That is the safety gate working. The quote only prints money after all 17 self-checks pass AND you paste the final review key as a value — any later edit to any input locks it again, so an out-of-date or broken number cannot slip into a quote you send.
What do I need to replace before using it for a real customer?
Every Price Book figure is a sample: replace material prices, waste factors and labor rates with your own supplier and crew rates, and enter your company details on the Quote sheet.
Does it include taxes or permit fees?
No — no sales tax, permit or jurisdiction-specific charges are added automatically. The Quote lists standard exclusions; apply your local taxes and required charges before issuing a binding proposal.